One cable slipping off its drum groove is enough to jam a door mid-cycle or send a panel crashing at an angle. We fix the cable and check why it slipped in the first place.
Matching wear on both cables means both get inspected and typically replaced together.
A cable can slip its groove repeatedly if the drum itself is damaged, which we check before calling the job done.
Our technicians are trained to safely release and reset tension when cables are involved, not just the springs.
Cable stock in standard gauges means most replacements happen in a single visit.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
We replace the snapped cable and its pair, then verify even tension across both sides.
Catching a fraying cable early avoids the sudden, uneven drop that comes with a full snap.
If the cable keeps slipping off the drum, we look for a bent drum or misaligned track causing the repeat issue.
Worn or cracked cable drums get replaced alongside the cable itself, since a damaged drum will fray the next cable too.
Correcting an uneven lean means addressing the cable, checking the spring pair, and confirming the track is still square.
Tell us if the door is hanging crooked or jammed, that detail helps us prioritize the call correctly.
Cable stock on the truck means most calls avoid a second trip for parts.
We check both cables and the drums together, then quote a flat price covering the full fix.
Cables replaced, tension balanced, and the door tested level before we leave, backed by written warranty.
“Cable kept jumping the drum every few cycles. Turned out the drum itself was cracked, replaced and fixed.”
“Caught the fraying cable during a routine call before it actually snapped. Appreciated the heads-up.”
“Door was jamming mid-cycle for weeks. Cable and drum issue, fixed in one visit.”
One side losing tension while the other holds is the classic sign of a single cable or spring failure.
Replacing just one often leads to a second failure soon after. We're upfront about that tradeoff.
This is a genuine safety hazard, especially with people or vehicles near the door opening.
Usually a bent or worn drum groove, sometimes combined with a slightly loose cable tension setting.
You'll get a confirmed price on-site once the technician inspects the full cable and drum setup.
Standard cable and drum stock means same-visit repair is the norm, not the exception.
Licensed technicians, flat-rate pricing, and a truck stocked for this exact job.
☎ Call +1-831-293-1591Technicians are positioned throughout Baldwin for fast response, and we cover the surrounding zip codes too.
Embedded Map Placeholder for Baldwin, WI